Monday, May 16, 2016

Custom commands during MySQL Sandbox installation

MySQL Sandbox 3.1.07 adds several options to execute shell or SQL commands during the sandbox installation.

Mysql sandbox states and hooks

Figure 1: MySQL Sandbox states and where you can run the hooks

There are 3 options to run shell commands, 2 to run SQL queries, and 2 to run SQL files.

## Shell commands
--pre_start_exec=command  : runs 'command' after the installation, before the server starts
--pre_grants_exec=command : runs 'command' after the server starts, before loading the grants.
--post_grants_exec=command : runs 'command' after the loading the grants.

## SQL statements
--pre_grants_sql=query : runs 'query' before loading the grants.
--pre_grants_file=filename : runs SQL file 'filename' before loading the grants.
--post_grants_sql=query : runs 'query' after the loading the grants.
--post_grants_file=filename : runs SQL file 'filename' before loading the grants.

Moreover, a new option --load_plugin=plugin[:plugin_file_name] loads a given plugin before the grants file is loaded.

What can you use this for?

The need arose when I needed general log activated at start-up, but did not want the option to stay in the configuration file. Then I also found that running a SQL command to install a plugin and check its status would be nice to have. When enough cases piled up, I implemented a few changes that allow MySQL Sandbox to accept commands at specific stages of the deployment. Figure 1 shows where these hooks are available.

Some use cases for SQL:

  • activate general log;
  • install plugins (although there is a specialized option for that)
  • enable superreadonly : this will only work after loading grants. If enabled before, the user creation commands will fail.
  • show the status of database variables, status, and objects.

Some use case for shell commands:

  • See the composition of the sandbox at various stages;
  • Run diagnostic tools, backups, synchronization tasks;
  • Perform dangerous tasks to test the server responsiveness;
  • General purpose hacks.

When the shell command runs, MySQL Sandbox provides several environment variables that facilitate interaction with the database that has been installed.

SANDBOX_DIR   =  sandbox directory;
BASEDIR       =  base directory for the sandbox binaries
DB_DATADIR    =  data directory
MY_CNF        =  configuration file
DB_PORT       =  database port
DB_USER       =  database user
DB_PASSWORD   =  database password
DB_SOCKET     =  database socket
MYSQL_VERSION =  MySQL version (e.g. 5.7.12)
MYSQL_MAJOR   =  Major part of the version (e.g 5)
MYSQL_MINOR   =  Minor part of the version (e.g 7)
MYSQL_REV     =  Revision part of the version (e.g 12)
EXEC_STAGE    =  Stage of the execution (pre_start_exec, pre_grants_exec, post_grants_exec)

Mysql sandbox order of execution

Figure 2: MySQL Sandbox order of execution

You can combine shell and SQL calls for all stages. They will run in the order shown in Figure 2.


Let's install the XPlugin. And using the shell commands we can check the status of the system from the outside.

$ make_sandbox 5.7.12 -- --load_plugin=mysqlx \
  --pre_grants_exec='echo "##open ports";sudo netstat -atn  |grep LISTEN|grep 33060; echo "##"' \
  --post_grants_exec='echo "open ports";sudo netstat -atn  |grep LISTEN|grep 33060;echo "##"'
# Starting server
.. sandbox server started
# [pre_grants_exec] system "echo "##open ports";sudo netstat -atn  |grep LISTEN|grep 33060; echo "##""
##open ports
INSTALL PLUGIN mysqlx soname ''

select plugin_name, plugin_version, plugin_status from information_schema.plugins where plugin_name = 'mysqlx'

| plugin_name | plugin_version | plugin_status |
| mysqlx      | 1.0            | ACTIVE        |
# Loading grants
# [post_grants_exec] system "echo "open ports";sudo netstat -atn  |grep LISTEN|grep 33060;echo "##""
open ports
tcp4       0      0  *.33060                *.*                    LISTEN
Your sandbox server was installed in $HOME/sandboxes/msb_5_7_12

Here, the load_plugin option loads the plugin before the grants. Before this happens, the shell command runs netstat to check the status of port 33060, which is the one that the MySQL XProtocol uses by default. We can see that the port is not available at that stage. The same command running after the grants are loaded shows that the port is open.

Another example. This time we will use a shell script that uses most of the variables listed above:

$ cat t/
echo "----------------------------------------------------------------"
echo "Stage: $EXEC_STAGE"
if [ "$EXEC_STAGE" == "pre_start_exec" ]
    echo "PWD <$PWD> "
    echo "VER <$MYSQL_VERSION> "
    echo "DIR <$SANDBOX_DIR> "
    echo "DATADIR <$DB_DATADIR> "
    echo "BASEDIR <$BASEDIR> "
    echo "SOCKET <$DB_SOCKET> "
    echo "MY_CNF <$MY_CNF>"
    echo "Version components <$MYSQL_MAJOR> <$MYSQL_MINOR> <$MYSQL_REV>"
# ls
echo '## Data directory'
ls  data
echo "----------------------------------------------------------------"

The script shows the value of the variables for the first stage only and the contents of the data directory:

$ make_sandbox 5.7.12 --  --pre_start_exec=./t/ --post_grants_exec=./t/
# [pre_start_exec] system "./t/"
Stage: pre_start_exec
PWD <$HOME/workdir/git/mysql-sandbox>
VER <5.7.12>
DIR <$HOME/sandboxes/msb_5_7_12>
DATADIR </Users/gmax/sandboxes/msb_5_7_12/data>
BASEDIR <$HOME/opt/mysql/5.7.12>
SOCKET </tmp/mysql_sandbox5712.sock>
MY_CNF <$HOME/sandboxes/msb_5_7_12/my.sandbox.cnf>
USER/PASSWORD/PORT <msandbox> <msandbox> <5712>
Version components <5> <7> <12>
## Data directory
auto.cnf        ib_buffer_pool        ibdata1            mysql            performance_schema    sys
# Starting server
.. sandbox server started
# Loading grants
# [post_grants_exec] system "./t/"
Stage: post_grants_exec
## Data directory
auto.cnf        ib_logfile0        ibdata1            msandbox.err    performance_schema    test
ib_buffer_pool        ib_logfile1        ibtmp1            mysql          sys
Your sandbox server was installed in $HOME/sandboxes/msb_5_7_12

We can see that the data directory, before the server starts, contains only the files created by mysqld --initialize-insecure, while after the start and the grant load we get the InnoDB log files, the .pid files, and the test database (created by the grants script).

Wednesday, May 04, 2016

Docker for Mac beta and MySQL - First impressions

Using Docker for development is a great way of ensuring that what you develop will be the same that you deploy in production. This is true for almost everything. If you develop on Linux, the above statement holds. If you develop on a different operating system (OSX or Windows) there are several restrictions.

I showed one of those issues in a recent article (MySQL and Docker on a Mac: networking oddity.) When you want to export a port from a service running in the container, the exported port is not available in your mac, but in the virtual machine that runs Docker services. This happens with any application that listens to a port.

The second limitation I found affects only MySQL, and it is related to using volumes. The proper way of achieving data persistence with containers is through volumes, i.e. telling the container to run the data directory in a virtual path that refers to some safe place in the host computer. That can't be done on a Mac, because the host computer is a virtual machine, and even though Docker can access a folder in your Mac, the server installation fails for lack of permissions.

Both the above restrictions are lifted if you use the beta release of Docker for Mac and Windows. It's a private beta: you need to apply and wait to be given an operational token, but once you are in, you notice the differences between the beta and the "old" Docker-Toolbox:

Docker beta

  • The Docker app is a native app, which you install by copying its icon to the /Application folder;
  • You don't need Virtualbox or VMware Fusion. It comes with its own lightweight VM based on xhyve.
  • There is no need to run docker-machine start xxx and eval $(docker-machine env xxx). The new app is fully integrated with the OS.
  • Ports exported from a container are available in your Mac.
  • You can keep both the Docker Toolbox and the new Docker app in the same host, provided that you don't run them both in the same terminal session.

Back to our claim of lifted limitations: let's try a full installation on a Mac as we would do it on Linux.

$ docker run --name mybox -e MYSQL_ROOT_PASSWORD=secret -d \
    -v ~/docker/mysql/single:/var/lib/mysql \
    -p 5000:3306 mysql/mysql-server

$ ls  ~/docker/mysql/single/
auto.cnf    client-key.pem  ibdata1     mysql.sock.lock    server-cert.pem
ca-key.pem  ib_buffer_pool  ibtmp1      performance_schema server-key.pem
ca.pem      ib_logfile0     mysql       private_key.pem    sys
client-cert.pem             ib_logfile1 mysql.sock         public_key.pem

We create a MySQL server container with the internal port 3306 exposed to the external port 5000, and the data directory running in the host directory $HOME/docker/mysql/single. It seems that the data directory was created correctly. Now we use a MySQL client on the Mac to connect to the container, using port 5000 on the local network address (Note: there is NO database server running on my mac. Only in the container).

$ sudo netstat -atn  |grep LISTEN | grep 5000
tcp4       0      0  *.5000                 *.*                    LISTEN

$ ~/opt/mysql/5.7.12/bin/mysql -h  -u root -psecret -P 5000
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.7.12 MySQL Community Server (GPL)

Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> create schema hello_docker;
Query OK, 1 row affected (0.01 sec)

mysql> use hello_docker
Database changed
mysql> create table i_am_here(id int);
Query OK, 0 rows affected (0.03 sec)

mysql> exit

$ ls  ~/docker/mysql/single/hello_docker/
db.opt        i_am_here.frm    i_am_here.ibd

This is full integration! Using a Mac client we connected to the container, where we created a table, which then appeared inside the data directory in the Mac host!

It's still early to say if this beta is ready for more serious work, but the first impressions are really good!

Monday, May 02, 2016

Taking the MySQL document store for a spin

This is not a comprehensive review, nor an user guide. It's a step-by-step account of my initial impressions while trying the new MySQL XProtocol and the document store capabilities. In fact, I am barely scratching the surface here: more articles will come as time allows.

MySQL 5.7 has been GA for several months, as it was released in October 2015. Among the many features and improvements, I was surprised to see the MySQL team emphasizing the JSON data type. While it is an interesting feature per se, I failed to see the reason why so many articles and conference talks were focused around this single feature. Everything became clear when, with the release of MySQL 5.7.12, the MySQL team announced a new release model.


In MySQL 5.7.12, we get the usual MySQL server, which shouldn't have new features. However, in an attempt to combine the stability of the server with a more dynamic release cycle, the server ships with a new plugin, unimaginatively named X-Plugin, which supports an alternative communication protocol, named X-Protocol.

In short, the X-Protocol extends and replaces the traditional client/server protocol, by allowing asynchronous communication to the server, using different API calls, which are available, as of today, in Javascript, Python, C#, and Java, with more languages to come.

The reason for this decision is easy to see. Many developers struggle with relational tables and SQL, while they understand structures made of arrays and associative arrays (maps.) This is also one of the reasons for the recent popularity of NoSQL databases, where schemas and tables are replaced by collections of documents or similar schema-less structures. With this new release, MySQL wants to offer the best of two worlds, by allowing developers to use the database with the tools they feel most comfortable with.

To use the new plugin, you need two components:

  • The plugin itself, which ships with the server package, but is not enabled by default;
  • The MySQL shell, a new command line tool that you have to download and install separately and will allow you to use Javascript or Python with the database.

As a QA professional, I am a bit concerned about this mix of GA and alpha features (The MySQL shell is defined as alpha software. and the shell itself says development preview in its help). Theoretically, the two worlds should be separated. If you don't install the plugin, the server should work as usual. But practice and experience tell me that there are dangers waiting for a chance to destroy our data. If you want a single piece of advice to summarize this article, DON'T USE the new MySQL shell with a production server. That said, let's start a quick tour.


You need to install the shell, which comes in a package that is different from the rest of MySQL products. The manual shows how to install it on OSX or Linux. The only mention that this product could be dangerous to use is a note reminding the user to enable the MySQL Preview Packages when installing from a Linux repository. The procedure, on any operating system, will install library and executables globally. Unlike the server package, it is not possible to install it in a user-defined directory, like you install the server with MySQL Sandbox. In this context, the standard Oracle disclaimer may have a meaning that goes beyond a regular CYA.

Next, you need to enable the plugin. You can do it in three ways:


$ mysqlsh --classic -u youruser -p --dba enableXProtocol
mysqlx: [Warning] Using a password on the command line interface can be insecure.
Creating a Classic Session to youruser@localhost:3306
Enter password:
No default schema selected.

enableXProtocol: Installing plugin mysqlx...
enableXProtocol: done


Start the server with This will enable the plugin, although it does not seem to work the way it should.


Enable the plugin with a SQL command.

mysql> install plugin mysqlx soname '';

I prefer method #3 because is the only one that does not have side effects or misunderstanding. The issue that hit me when I tried method #1 for the first time is that calling mysqlsh --classic uses the client/server protocol on port 3306 (or the port that you defined for the database) while subsequent calls will use the X-Protocol on port 33060.

Alternatives. Using Docker

If what I said previously has made you cautious and you have decided not to use the shell in your main computer (as you should), there are alternative ways. If you have a data center at your disposal, just fire a virtual machine and play with it. However, be aware that the MySQL shell does not install in Ubuntu 15.04 and 16.04.

A lightweight method to try on the new shell without endangering your production server is to use a Docker image for MySQL, or a combination of MySQL Sandbox and Docker.

In Docker, the MySQL shell does not ship together with the server. It requires a separate image. A quick guide is available in a recent article. I don't like the current approach: having two images is a waste of space. It would be acceptable if the images were based on a slim Linux distribution, such as Alpine. Since they run on OracleLinux, instead, you need to download two beefy images to start testing. With a fast internet connection this should not be a problem, but if you live in a place where 3 MBPS is the norm or if you are traveling, this could become an annoyance. Once you have pulled the images, you can use them at will, even without internet connection.

The above mentioned quick guide suggests using docker run --link to connect the two containers. I recommend a different approach, as the link option is now considered legacy.

$ docker network create mynet
$ docker network ls
NETWORK ID          NAME                DRIVER
a64b55fb7c92        bridge              bridge
0b8a52002dfd        none                null
cc775ec7edab        host                host
edcc36be21e5        mynet               bridge

$ docker run --name mybox  -e MYSQL_ROOT_PASSWORD=secret -d --net mynet mysql/mysql-server:5.7.12 \

$ docker run -it --net mynet mysql/shell -u root -h mybox -p
Creating an X Session to root@mybox:33060
Enter password:
No default schema selected.

Welcome to MySQL Shell 1.0.3 Development Preview

Copyright (c) 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective

Type '\help', '\h' or '\?' for help.

Currently in JavaScript mode. Use \sql to switch to SQL mode and execute queries.

The first command creates a network (called mynet).

The second command creates the server container, which is launched using the network mynet and with the plugin-load option (which seems to work well with the docker image). When you use a docker network, the container name is recognized by the network as an host name, and can be called by other members of the network. This is much cleaner than using --link.

The third command runs the MySQL shell, using the same network. This allows us to use the container name (mybox) without any other options.

Running the MySQL Javascript shell

My favorite setup for this test is a mix of MySQL Sandbox for the server and Docker for the shell. This way I can use the alpha shell without polluting my Linux host and use a feature rich MySQL Sandbox to control the server.

Here is what I do:

$ make_sandbox 5.7.12 -- --no_show -c general_log=1 -c general_log_file=general.log

I start a sandbox with MySQL 5.7.12 (tarball expanded and renamed into /opt/mysql/5.7.12), with the general log enabled. We need this to peek under the hood when we use the document store.

Next, we load the sample world_x database from the MySQL documentation page.

$ ~/sandboxes/msb_5_7_12/use  -e 'source world_x.sql'

Finally, we enable the plugin.

$ ~/sandboxes/msb_5_7_12/use  -e "install plugin mysqlx soname ''"

Now we can connect the shell:

$ docker run -it --net host mysql/shell -u msandbox -pmsandbox world_x
mysqlx: [Warning] Using a password on the command line interface can be insecure.
Creating an X Session to msandbox@localhost:33060/world_x
Default schema `world_x` accessible through db.

Welcome to MySQL Shell 1.0.3 Development Preview

Copyright (c) 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective

Type '\help', '\h' or '\?' for help.

Currently in JavaScript mode. Use \sql to switch to SQL mode and execute queries.

What have we done? We use the network named 'host', which is a standard Docker protocol that lets a container use the host environment. We don't need to specify a port, since the shell assumes 33060 (enabled by the X-Plugin). The username and password are the usual ones for a sandbox. We enter inside a Javascript shell, where we can communicate with the database server using an alternative syntax. Let's see what we have:

  • We have an "X-Session" using port 33060 and working on database world_x;
  • There is a help, same as in the MySQL client;
  • The database world_x is accessible through the variable db.
  • Note: all the commands used below are the same for Python and Javascript. There are differences only when using the language extensively.

With the above elements, we can try getting data from the database.

mysql-js> db.collections
    "CountryInfo": <Collection:CountryInfo>

mysql-js> db.tables
    "City": <Table:City>,
    "Country": <Table:Country>,
    "CountryLanguage": <Table:CountryLanguage>

What does it mean? Let's abandon the Javascript shell and look at the traditional client:

mysql [localhost] {msandbox} (world_x) > show tables;
| Tables_in_world_x |
| City              |
| Country           |
| CountryInfo       |
| CountryLanguage   |
4 rows in set (0.00 sec)

Here we see 4 tables, while the Javascript console lists only 3. However, the fourth table has the same name as the "collection." Let's have a look:

mysql [localhost] {msandbox} (world_x) > desc CountryInfo;
| Field | Type        | Null | Key | Default | Extra            |
| doc   | json        | YES  |     | NULL    |                  |
| _id   | varchar(32) | YES  |     | NULL    | STORED GENERATED |
2 rows in set (0.00 sec)

mysql [localhost] {msandbox} (world_x) > show create table CountryInfo\G
*************************** 1. row ***************************
       Table: CountryInfo
Create Table: CREATE TABLE `CountryInfo` (
  `doc` json DEFAULT NULL,
  `_id` varchar(32) GENERATED ALWAYS AS (json_unquote(json_extract(`doc`,'$._id'))) STORED
1 row in set (0.00 sec)

Look what we got! A JSON column with a dynamic index implemented as a virtual column. Now we can appreciate why the JSON data type was such an important thing.

Back to the Javascript shell, let's get something from the database. (You can get all the commands I am using, and much more, from the manual.)

mysql-js> db.collections.CountryInfo.find("_id='USA'")
        "GNP": 8510700,
        "IndepYear": 1776,
        "Name": "United States",
        "_id": "USA",
        "demographics": {
            "LifeExpectancy": 77.0999984741211,
            "Population": 278357000
        "geography": {
            "Continent": "North America",
            "Region": "North America",
            "SurfaceArea": 9363520
        "government": {
            "GovernmentForm": "Federal Republic",
            "HeadOfState": "George W. Bush"
1 document in set (0.00 sec)

Apart from the feeling of being back in the good old times when MySQL was still playing with IPO dreams (look at the HeadOfState field in the above data), this record is a straightforward JSON document, where data that should belong to different normalized tables are bundled together in this unified view. So, we are really querying a Table that contains JSON data associated with an _id. We know because the general log lists what happens after our simple query:

SELECT doc FROM `world_x`.`CountryInfo` WHERE (`_id` = 'USA')

Let's try a more complex query. We want all countries in Oceania with a population of more than 150,000 people, and whose Head of State is Elisabeth II. The query is a bit intimidating, albeit eerily familiar:

mysql-js> db.collections.CountryInfo.find("government.HeadOfState='Elisabeth II' AND geography.Continent = 'Oceania' AND demographics.Population > 150000").fields(["Name", "demographics.Population","geography.Continent"])
        "Name": "Australia",
        "demographics.Population": 18886000,
        "geography.Continent": "Oceania"
        "Name": "New Zealand",
        "demographics.Population": 3862000,
        "geography.Continent": "Oceania"
        "Name": "Papua New Guinea",
        "demographics.Population": 4807000,
        "geography.Continent": "Oceania"
        "Name": "Solomon Islands",
        "demographics.Population": 444000,
        "geography.Continent": "Oceania"
4 documents in set (0.00 sec)

Here is the corresponding SQL query recorder in the general log:

    'Name', JSON_EXTRACT(doc,'$.Name'),'demographics.Population', \
    JSON_EXTRACT(doc,'$.demographics.Population'),'geography.Continent', \
) AS doc 
FROM `world_x`.`CountryInfo` \
    ((JSON_EXTRACT(doc,'$.government.HeadOfState') = 'Elisabeth II') \
    AND (JSON_EXTRACT(doc,'$.geography.Continent') = 'Oceania')) \
    AND (JSON_EXTRACT(doc,'$.demographics.Population') > 150000)

I am not sure which one I prefer. The SQL looks strange, with all those JSON functions, while the Javascript command seems more readable (I had never thought I would say what I have just said!)

Enough with reading data. I want to manipulate some. I'll start by creating a new collection.

 mysql-js> db.createCollection('somethingNew')

And the general log shows what should not be a surprise, as we have seen a similar structure for CountryInfo:

CREATE TABLE `world_x`.`somethingNew` (doc JSON, \
_id VARCHAR(32) \

Now, to the data manipulation:

mysql-js> mynew=db.getCollection('somethingNew')

The variable mynew can access the new collection. It's a shortcut to avoid db.collections.somethingNew

mysql-js> db.collections
    "CountryInfo": <Collection:CountryInfo>,
    "somethingNew": <Collection:somethingNew>
mysql-js> mynew.find()
Empty set (0.00 sec)

As expected, there is nothing inside the new collection. Now we enter a very minimal record.

mysql-js> mynew.add({Name:'Joe'})
Query OK, 1 item affected (0.01 sec)

mysql-js> mynew.find()
        "Name": "Joe",
        "_id": "e09ef177c50fe6110100b8aeed734276"
1 document in set (0.00 sec)

The collection contains more than what we have inserted. There is an apparently auto-generated _id field. Looking at the general log, we see that the data includes the new field.

INSERT INTO `world_x`.`somethingNew` (doc) VALUES ('{\"Name\":\"Joe\",\"_id\":\"e09ef177c50fe6110100b8aeed734276\"}')

As you can see, an _id field was added automatically. We could override that behavior by providing our own value:

mysql-js> mynew.add({_id: "a dummy string", Name:"Frank", country: "UK"})

The data inserted now includes the _id filed with our manual value. The general log says:

INSERT INTO `world_x`.`somethingNew` (doc) VALUES ('{\"Name\":\"Frank\",\"_id\":\"a dummy string\",\"country\":\"UK\"}')

The value of _id, however, must be unique, or the engine will generate an error:

mysql-js> mynew.add({_id: "a dummy string", Name:"Sam", country: "USA"})
MySQL Error (5116): Document contains a field value that is not unique but required to be

If all this gives you a sense of deja-vu, you're right. This feels and smells a lot like MongoDB, and I am sure it isn't a coincidence.

Synchronizing operations

As our last attempt for the day, we will see what happens when we manipulate data in SQL and then retrieve it in Javascript or Python.

We leave the JS console open, and we do something in SQL

mysql [localhost] {msandbox} (world_x) > drop table somethingNew;
Query OK, 0 rows affected (0.01 sec)

How does it look like on the other side?

mysql-js> db.collections
    "CountryInfo": <Collection:CountryInfo>,
    "somethingNew": <Collection:somethingNew>
mysql-js> db.getCollections()
    "CountryInfo": <Collection:CountryInfo>,
    "somethingNew": <Collection:somethingNew>

Oops! mysqlsh didn't get the memo! It still considers somethingNew to be available.

mysql-js> db.collections.somethingNew.find()
MySQL Error (1146): Table 'world_x.somethingNew' doesn't exist

We need to refresh the connection. Unlike the SQL client, you need to specify the connection parameters.

mysql-js> \connect msandbox:msandbox@localhost:33060/world_x
Closing old connection...
Creating an X Session to msandbox@localhost:33060/world_x
Default schema `world_x` accessible through db.

mysql-js> db.collections
    "CountryInfo": <Collection:CountryInfo>

We can see the same happening when we create a new table in SQL. The session in mysqlsh keeps showing the cached contents, and we need to refresh the session to see the changes. Looking at the general log, there are no changes when we issue commands asking for metadata, such as db.collections or db.tables. Instead, when we refresh the session, we see this:

SELECT table_name, COUNT(table_name) c FROM information_schema.columns \
   WHERE ((column_name = 'doc' and data_type = 'json') 
   OR (column_name = '_id' and generation_expression = 'json_unquote(json_extract(`doc`,''$._id''))')) \
   AND table_schema = 'world_x' GROUP BY table_name HAVING c = 2

The first query lists all tables that contain a JSON document and a generated _id (these are the collections). The second one lists all tables. Then the shell removes from the table list all the ones that were in the collections list.

Given the way it is done, we can cheat the system easily by creating something that looks like a collection, but has extra fields:

CREATE TABLE strangedoc (doc JSON, \
_id VARCHAR(32) \
    secret_stash varchar(200),
    more_secret_info mediumtext
) CHARSET utf8mb4 ENGINE=InnoDB;

mysql [localhost] {msandbox} (world_x) > insert into strangedoc (doc,secret_stash,more_secret_info) values \
('{"_id": "abc", "name": "Susan"}', \
'and now for something completely different', \
'Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.');
Query OK, 1 row affected (0.00 sec)

mysql [localhost] {msandbox} (world_x) > select * from strangedoc\G
*************************** 1. row ***************************
             doc: {"_id": "abc", "name": "Susan"}
             _id: abc
    secret_stash: and now for something completely different
more_secret_info: Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
1 row in set (0.00 sec)

And the Javascript console will be unaware of the extra material:

mysql-js> db.collections
    "CountryInfo": <Collection:CountryInfo>,
    "strangedoc": <Collection:strangedoc>
mysql-js> db.strangedoc.find()
        "_id": "abc",
        "name": "Susan"
1 document in set (0.00 sec)

We can add contents to the collection in Javascript, and the database server won't protest (provided that the extra fields are nullable or have a default value). Is it a bug or a feature?

Parting thoughts

As I have said at the beginning, this is a very simple exploration. More work is required to test the full potential of the new model. My impressions are mildly positive. On one hand, it's an exciting environment, which promises to expand to better usefulness with more programming languages and possibly better coordination between shell and server software. On the other hand, there are many bugs, and the software is still very green. It will require more iterations from the community and the development team before it could be trusted with important data.

Vote on Planet MySQL